ProLink Copper Accessories PL-KJ6-RTL-W

PROLINK CAT6 UTP 1G Keystone Jack Rotating with Clip Adapter

The PROLINK CAT6 UTP 1G Keystone Jack Rotating with Clip Adapter (PL-KJ6-RTL-W) is designed for modernizing your physical network infrastructure. Whether you’re setting up local area networks (LANs) or connecting network equipment, this tool-less connection module delivers exceptional performance.

Key Features:

• Real Category 6 Hardware Performance: Significantly exceeds Category 6/CLASS E link performance requirements.
• Tool-less Jack: Easy and quick to install. Fast reliable connection in record time; all 8 copper conductors are effortlessly terminated in a single operation.
• Quality of Connection by Design: Independent of tool condition or operator skill—just listen for the click. Consistent results. The length of untwisted pairs and the length between the end of the conductor and the IDC contacts are always kept to a minimum, by design.
• Reusable: If a wiring mistake is made, there is no need to use a new jack. Just open and terminate. No delay waiting for another delivery.
• Integral Shutter: Increased dust protection, especially during installation or in a dirty environment. No additional shuttering required on faceplates. Higher port density. Allows direct mounting into floor boxes. Protects jacks in the patch panel.

Mechanical Data:

• Number of RJ45 Jacks: 8/jack
• Operating Temperature Range: -10°C to 60°C
• Storage Temperature Range: -40°C to 70°C
• Contact Material: CuSn
• Contact Area Plating: 1.2 μm gold over nickel
• IDC Plating: Tin-plated
• Cutting Blade Material: Stainless steel
• Housing Material: Polycarbonate (UL-94-V0)
• Admissible Wire Diameter: 0.4 mm (AWG26) – 0.65 mm (AWG22)
• Admissible Strand Diameter: AWG26/7 – AWG22/7
• Admissible Insulation Diameter: 0.8 mm – 1.6 mm
• Cable Diameter: 10 mm maximum
• Cable Strain Relief: Through cable tie

Electrical Data:

• Mating Cycles (min.): 750
• Re-terminations: 20
• Insulation Resistance: 250 MΩ (100 V DC)
• Contact Resistance: < 200 mΩ
• Current Carrying Capacity: 1 Amp @ 60°C

Frequency Performance (MHz):

• Insertion Loss: -0.05 dB
• Return Loss: -48.3 dB
• NEXT: -97.3 dB
• PS ANEXT: -81.2 dB

Technical File